Ethernet Adaptor || Sparr Electronics

Ethernet Adaptor

EAD is a protocol converter which transmits the serial Data sent by the Equipment as TCP packets to the LAN/Network and converts back to TCP/IP data received from the LAN/ Network as Serial Data to the equipment. EAD also supports UDP Protocol for Broadcast application.

EAD is a protocol converter which transmits the serial Data sent by the Equipment as TCP packets to the LAN/Network and converts back to TCP/IP data received from the LAN/ Network as Serial Data to the equipment . EAD also supports UDP Protocol for Broadcast application.
EAD-01 is a low-cost, High performance, Serial RS-232 / RS-485 / RS-422 to Ethernet LAN 10/100 Mbps connectivity system using the TCP / IP protocol and is based on ARM Cortex M4 high speed 32-Bit Microprocessor. EAD-01 has built-in web server for configuration.

Serial Interface	-
Interface	RS 232, RS 485/RS422
Connector	9 Pin Male D-Type for RS232,RS485 & RS422
Baud Rates	300 to 115200bps
Data Bits	7 or 8
Parity	Odd, Even and No Parity
Stop Bit	1 or 2
Flow Control	None, XON/XOFF
Network Interface	-
Interface	Ethernet 10 Base-T or 100 Base-TX Connector
Connectors	RJ 45 Female
Protocols	TCP,UPD,ARP,ICMP,MAC,TELNET,DHCP & HTTP. SNMP & MODBUS (Optional)
Indicators (LED)	-
Red	Power ON
Yellow	Connection Status
Green	Transmit Data from Serial
Yellow	Receive Data to Serial
Processor	ARM Cortex M4
Memory	1MB
Power	-
Input	5 to 24V DC
RS 485/422	-
Maximum No of nodes	32
Maximum cable length	1200m
Isolation	>2500
Environmental	-
Operating	0 u00b0C to 65 u00b0C
Storage	0 u00b0C to 75 u00b0C
Packaging	-
Dimensions (LxWxH)	89mm(L)x93mm(W)x25mm(H)
Weight	200g
Warranty	12 Months