Radio Frequency Identification-RFID 125 || Sparr Electronics

Radio Frequency Identification-RFID 125

RFID-125 Converts radio waves returned from the RFID tag into a form that can be passed on to Controllers, which can make use of it. The tags and readers have to be tuned to the same frequency to communicate.

RFID-125 Converts radio waves returned from the RFID tag into a form that can be passed on to Controllers, which can make use of it. The tags and readers have to be tuned to the same frequency to communicate.
The frequency supported by the reader is 125 KHz.
Designed as a Plug & Play Module and can be plugged on a Standard 300 MIL - 28 Pin IC socket form factor.
Supports reading of 64 Bit Manchester Encoded cards.

Serial Interface	-
Interface	UART (TTL), RS232 and Wiegand
Connector	Berg Pins (MD), 9 Pin Female for MDV & PB. RMC for Wiegand (Optional)
Baud Rates	9600bps
Data Bits	8
Parity	No Parity
Stop Bit	1
Data Format	Send Tag ID HEX Value in ASCII format with Carriage Return and Line-Feed
Network	-
Frequency	125 KHz
Read Range	up to 7 cm
Supported TAG	Supports reading of 64 Bit Manchester Encoded Card
Wiegand	26 Bit Format
Indicators	-
Visual	LED Blinking for TAG read. Green LED in MDV. Berg Pin in MD
Audio	Single BEEP for TAG read. Buzzer in MDV. Berg Pin in MD
power	-
Input for RFID MD	5 V DC ( u00b1 5 %)
Input for RFID MDV	12 V DC
Input for RFID PB	12 V DC
Maximum Consumption	60 mA
Environment	-
Operating Temperature	-20 u00b0C to 65 u00b0C
Storage Temperature	-40 u00b0C to 75 u00b0C
Packaging	-
Product Name	RFID 125 MDV	RFID 125 MD	RFID 125 PB
Dimensions	36 mm (L) x 18 mm (W) x 10 mm (H)	41 mm (L) x 21 mm (W) x 7.5 mm (H)	100 mm (L) x 57 mm (W) x 32 mm (H)
Weight	55g	25g	75g
Warranty	6 months	3 months	12 months