EAD SNMP ADAPTOR || Sparr Electronics

EAD SNMP ADAPTOR

EAD is a protocol converter which transmits the serial Data sent by the Equipment as TCP packets to the LAN/Network and converts back to TCP/IP data received from the LAN/ Network as Serial Data to the equipment.

Converts serial or Ethernet devices to SNMP-enabled devices
Provides real-time monitoring and control of connected equipment
Web-based configuration and management interface
Event trap generation on configurable thresholds
Supports communication mode: SNMP
Secure access with user authentication and configurable permissions
LED indicators for power, network, and serial communication status

Serial Interface	-
Interface	RS 232, RS 485/RS422
Connectors	9 Pin Male D-Type for RS232,RS-485 &amp;amp;amp;amp;RS-422
Baud Rates	300 to 115200bps
Data Bits	7 or 8
Parity	Odd, Even and No Parity
Stop Bit	1 or 2
Flow Control	None, XON/XOFF
Network Interface	-
Interface	Ethernet 10 Base-T or 100 Base-TX Connector
Connector	RJ 45 Female
Protocol	SNMP
Indicators (LED)	-
RED	Power ON
YELLOW	Connection Status
GREEN	Transmit Data to Serial
YELLOW	Receive Data from Serial
Processor	-
CPU	ARM Cortex M4
Memory	1MB
Power	-
Input	5 to 24 V DC
RS485/422	-
Maximum No of nodes	32
Maximum Cable Length	1200m
Isolation	2500
Environmental	-
Operating	0 u00b0C to 65 u00b0C
Storage	0 u00b0C to 75 u00b0C
Packaging	-
Dimensions (LxWxH)	89mm(L)x93mm(W)x25mm(H) for Box Product / 79mm(L)x50mm(W)x18mm(H) for Board level
Weight	200g (Box Level) , 30g (Board Level)
Warranty	12 Month for Box Product, 6 Months for Board level Product